Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Finally getting into Geothermal

Bjorn_2
Bjorn_2 Member Posts: 7
in THE MAIN WALL
FHP/Bosh recently came to my town. Does anyone know much about FHP?

Comments

  • Cosmo_3
    Cosmo_3 Member Posts: 845


    I signed up for the Waterfurnace 3 day training class in Exton, PA next week.

    I have a few potential customers that have been asking me about incorporating it into their existing radiant floor systems.

    Will any wallies be there?

    What do you guys think of Waterfurnace? I have serviced a few water to air systems that were abandoned by the original installing contractor and have learned a whole lot. They seem to be a pretty good company to deal with and Mike Fink my territory rep is always pretty quick to repond w/ questions.
  • John Pipkorn
    John Pipkorn Member Posts: 12
    Can't be beat

    I have been installing WaterFurnace since 1991 and have never been disappointed with the product. They have always been ahead of the game from what I have seen comparing other brands. They have excellent marketing stuff for dealers. They require contractors to get trained, I see other brands being offered by my suppliers and I can buy the equipment off the shelf, no training necessary. Back in the 90's I saw some bad installations because of lack of training, that can really screw things up over time. IMO.
  • Ken D.
    Ken D. Member Posts: 836
    FHP

    Been dealing with FHP since '92. Good quality and tech support. We have not had any major problems.
  • A.J.
    A.J. Member Posts: 257
    We finally got in

    Water Furnace has a wealth of info. and Mike is a great T.M.
  • Heat Geek
    Heat Geek Member Posts: 1
    Geothermal


    My money is on Earthlink (ECR/ETI)

    Direct Exchange system for higher efficiency.

    You should check them out at the very least.
  • Cosmo_3
    Cosmo_3 Member Posts: 845


    Yes I do like the ECM system concept of direct bury of the refrigerant lines, form what I remember you can get a 10 degree higher water to water output temp.

    It just seems to me that Waterfurnace has a stronger presence in my market and it would be easier for me to get started with them for now.

    Yeah, Mike's a good guy I have serviced some DX equipment that fell into my lap from a botched system (and contractor) and both Mike and the factory tech support was very helpful.

    Cosmo

This discussion has been closed.

Categories