Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
Taco flow checks
Options
targetman
Member Posts: 105
Can I use Taco flow checks with zone valves?
0
Comments
-
Yes.
But only if required. Each fitting of that ilk adds resistence to flow to a zone - thereby reducing flow slightly.
Given that ZV's are already positive checks, why add yet another? What are you trying to overcome?
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
The job was originally circulators.0 -
remove
Remove the flow checks, they are not needed.0
This discussion has been closed.
Categories
- All Categories
- 87.4K THE MAIN WALL
- 3.2K A-C, Heat Pumps & Refrigeration
- 61 Biomass
- 429 Carbon Monoxide Awareness
- 120 Chimneys & Flues
- 2.1K Domestic Hot Water
- 5.8K Gas Heating
- 115 Geothermal
- 167 Indoor-Air Quality
- 3.7K Oil Heating
- 77 Pipe Deterioration
- 1K Plumbing
- 6.5K Radiant Heating
- 395 Solar
- 15.7K Strictly Steam
- 3.4K Thermostats and Controls
- 56 Water Quality
- 51 Industry Classes
- 50 Job Opportunities
- 18 Recall Announcements