a blast from the past (pics)

now this is a boiler

This is one nice lookin boiler, its a shame i have to take it out :-( After they remove the apestos i will keep the boiler i going to put it in the shed and when i have the new shop, i will restore it and i will put in on display.......David



To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

That's a beaut all right... all the cast iron vines and stuff. Is the original ash door available, or did they butcher it for the oil burner


.

Those round boilers

weren't very efficient, maybe 40-50% on oil or gas according to one of my Dead Men's Books. The large, short flue passages let lots of heat escape up the chimney. It's possible the new boiler (with proper main vents etc) will cut fuel consumption in half.

But that old Crawford is nice to gaze at.....

To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"

That is REALLY old. I didn't notice a lwco. Did it have one? I have seen lots of square boilers with fancy doors etc. but never saw a round one like that.

Thay must have had a lot of fun putting those togeather. Must have been difficult to get the sections squared up to pull togeather on top of each other like that.

Makes the case for push nipples over rubber gaskets!

ED

LWCO

> That is REALLY old. I didn't notice a lwco. Did

> it have one? I have seen lots of square boilers

> with fancy doors etc. but never saw a round one

> like that.

>

> Thay must have had a lot of fun

> putting those togeather. Must have been difficult

> to get the sections squared up to pull togeather

> on top of each other like that.

>

> Makes the case

> for push nipples over rubber gaskets!

>

> ED





To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"