Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

GB install ( s. milne )

2»

Comments

  • ScottMP
    ScottMP Member Posts: 5,883
    That he is Mark.

    And I would think you would be humbled Mark to know we think that highly of the work your doing to make it the standard :) How about the CHT standard ?

    You Know that was no slam, Darin and You have done some top knotch work and we all see it as a challange to do that same and/or better. You complete me :)

    MY only laugh is that Chris called himself "boneheaded". Far from my man, far from it.

    We will continue to strive to do the best for our customers and to come to the wall for your advice and counsel. It really is like having one big company, is'nt ?

    ME, thanks for all the positve comments.

    O.K. who's got the next one ?

    Scott

    PS: By the way, Chris did'nt post a picture of the finish with the hot file which allows all the manuels to be left in easy access. Another wall tip.

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • Darin Cook_2
    Darin Cook_2 Member Posts: 205
    There is only one Hunt standard

    That is he must have Vat 69 scotch. Nothing but the best for Mrs Hunts little boy!


    Darin


    P.S. Chris do not sweat a mistake. Every job I do I can go back and see something I would have done differently. That is what makes us all continue to grow into better professionals! Be glad Devan has some good eyes!
  • [Deleted User]
    [Deleted User] Posts: 0
    Heres one for ya...

    This poor woman paid good money for this system. It quits working at temperatures below 32 degrees F. Not really sure why, but it's going to cost her about $5k to straighten it all out.

    She was told by the installers that it was normal for the little boiler to shut down at temps below 32 degrees F. I feel like persuing this person, but can't do so without jeopordizing the consumer. No permit was pulled. Imagine my suprise...

    ME
  • Craig Richard
    Craig Richard Member Posts: 5
    Trophy Systems

    That installation is very tidy and shiny, must have taken a few hours to design and install. Feel free to view these systems that we have available to ship direct to contractors. They can reduce design and installation times by 75%.

    The Trophy System pictured on the left is available for DHW, 1 high temperature, 1 mixed temperature- or any combination. Operating capacity is 13GPM.

    The Varimix Trophy System pictured on the right provides one high temp (DHW) and 2 mixed temperatures, depending on your application. This operating capacity is at 20GPM.

    We manufacture the systems and controls. We ship direct.
  • ScottMP
    ScottMP Member Posts: 5,883
    Well

    at least it keeps the snow off that light :)

    What a shame, and the customer bought a effecient piece of equipment. What a poor install. Never mind that WHO TELLS THE CUSTOMER THEIR HEAT WON'T WORK BELOW 32° ?????

    What the frick is that ???????????

    Scott

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
  • Mark Hunt
    Mark Hunt Member Posts: 4,908
    I know


    that Chris meant no offense and none was taken.

    As I said, his work is second to none.

    We all strive to keep raising the bar and Chris certainly does his share.

    We all make mistakes at some point(should I tell you all about the time I assembled a W-M LGB boiler backwards???)

    You guys are tops!!

    Mark H

    To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"
This discussion has been closed.

Categories