Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
New install,Very old house
I admit , you're smarter than me . We installed a Buderus a few weeks ago and I built the header right over the Logomatic . I'm an idiot .
How long does an install like this take ? Do you have another company rip out the old junk ?
One thing I learned recently is to throw a level on the Riello , it's real hard to see if it's straight when you put it in . You do amazing work Dave , post more picture often .
How long does an install like this take ? Do you have another company rip out the old junk ?
One thing I learned recently is to throw a level on the Riello , it's real hard to see if it's straight when you put it in . You do amazing work Dave , post more picture often .
0
Comments
-
200 yr plus house
We just finished this, the house was frist heated with a Vapor steam system but 15 yrs or so ago some thought it would be a good idea to change it to hot water:( what a bummer, they left all the old piping and added coin vents and a new boiler.. there was 4" 3" 2" 1 1/4" 3/4". there was a huge amount of water volume!! after that boiler gave up the ghost they put in a 4 sec 468 w+m that would not do it all so they added another GO-4 to handle the other zones but the 468 was wiped out way to much water for a 8148. we removed all the old pipe and added a 1 1/4" mono flow to the main house and repiped the added zones , removed the glycol, added a heat exchanger for the 4 season room, added no-burst to just that, it was a fun job, we also found that they left have the traps still intact, the house comes up to temp nice and even now0 -
you do very nice work!
its a shame that they didn't want to restore its former steam glory tho..but your work is beautiful.gwgillplumbingandheating.com
Serving Cleveland's eastern suburbs from Cleveland Heights down to Cuyahoga Falls.0 -
Thanks Gerry0 -
taco
Love the taco stuff on this job. Nothin' better!!!0 -
Looks Great!
That is a very compact install. It's too bad they couldn't give you more room to allow the piping to be more accessible. I know that cartridges are easy to replace and all that, but I prefer the pumps to be away from the electronics. Not that this sort of situation is uncommon - my pumps hover over the boiler as well.
If there is one finishing touch, I'd insulate the pipes down there. Congrats!0 -
thank you Constantin,
i just wish i could make the pictures stand up stright LOL0 -
Your wish is my command...
Cheers!0 -
THANK YOU
You are the TOPS!!!0 -
Superb Craftsmanship Mr Sutton!
Where is that house? Any property? History? a Barn? Mad Dog
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Maddog..
How have you been?? The house was built about 1750's its a center flue colonial, as you can see in the photo i had to hydro cement a all flue pipe into the tile because the wood beam runs thru the chimney. all the wood work is still the same as when it was built, got a small barn thats now a car garage. looks real nice. The house i live in was built about 1780 its a L shape farm house.0 -
Very nice. I know the owners will be comfortable and save fuel.
PATRIOT HEATING & COOLING, INC.
To Learn More About This Professional, Click Here to Visit Their Ad in "Find A Professional"0 -
Thanks Ted.
0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements