Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Radiant Loop Designer?

Carl_10 Member Posts: 4
I'm building a house in Virginia with a slab on grade in the basement and suspended slabs for two levels above. I'm planning to include radiant tubing in the slabs when I pour concrete (over the next few weeks), then waiting a few months (or a year) to install the radiant heating system. Does anyone know of someone who can do a heat loss calculation and radiant tubing layout for a project like this (in good quality at moderate cost)? I'm almost confident enough to do it, but running short on time.

I'm also looking for someone who can do duct layout for a forced air HVAC system.



  • Jim_19
    Jim_19 Member Posts: 31

    Check out NRT.ROB at this site. You see his postings on this board and on the radiant board. Verk knowledgeable guy.

  • Jed_2
    Jed_2 Member Posts: 781
    And what's his mileage going to be Maine-Virginia NM)

  • Rich Kontny_2
    Rich Kontny_2 Member Posts: 24

    What part of Virginia? I'm in the tidewater area.
  • Tim Doran
    Tim Doran Member Posts: 208
    Foley Mechanical

    They are in Arlington.

    Tim D.
  • Carl_10
    Carl_10 Member Posts: 4
    Radiant loop design

    We're in Arlington
  • John Jr
    John Jr Member Posts: 210
    Don't waste time or money

    Get the best in your area! Dan Foley and he is in Alexandria, phone number is 703-751-3288. Tell him the guy up north sent you! Kidding aside Dan is the man in your area! give him a call he can also provide duct sizing for you.
  • Rich Kontny_2
    Rich Kontny_2 Member Posts: 24
    Darn it

    everybody that want infloor always lives in Foley Mechanicals area.I'm moving.
This discussion has been closed.