Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Inexpensive BTU's

Options
Andy_14
Andy_14 Member Posts: 121
in THE MAIN WALL
I'm doing an area which the slab will not be enough to heat the building due to small area that pex can be put. Can anyone suggest inexpensive supplimental heat. I was looking at fan forced toe-kick units that produce about 10,000btu's for about $250. Anyone have another suggestion?

Comments

  • Steven Grady_2
    Steven Grady_2 Member Posts: 10
    options

    Andy,

    Try a panel radiator and install a two stage thermostat so the panel will only run under extreme conditions. I think $250 is low for any solution, at least you will utilize the radiant as much as possible.

    Steve
  • Andy_14
    Andy_14 Member Posts: 121


    Thanks for the reply Steve. I'll look into that.
This discussion has been closed.

Categories