Water feed for 1 pipe steam

will smith

Is there an absolute best location for tying in the fresh water makeup on a 1 pipe steam system (such as in the wet return near the boiler, or at a tee right at the boiler return)?

will smith

fresh water feed for 1 pipe steam

Is there an absolute best location for tying in the fresh water makeup on a 1 pipe steam system (such as in the wet return near the boiler, or at a tee right at the boiler return)?

Steamhead

I like to tie them in

to the wet return prior to the Hartford Loop. This helps keep from shocking the boiler with cold water.

To Learn More About This Contractor, Click Here to Visit Their Ad in "Find A Contractor"

Unknown

I'm with Steamhead

absolutely.
Noel

will smith

tie-in

Many thanks, Gents!