Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Reset Button
Options
Bill_4
Member Posts: 16
Ive got to push my reset button on the primary about once a month.Ive replaced the cad cell and the primary(Aquastat),and the boiler is clean as well as all the filters,any suggestions?
0
Comments
-
does this happen every time you get a fuel delivery?0 -
Bill
Do not just replace controls for the sake of replacing them.You must start somewhere and test each control with a meter or a gauge.I do not know if you are a homeowner but if you are please let a licensed oiltech check your unit out for you.If you would like someone in your area email me and I am sure I can get someone that can help you.0
This discussion has been closed.
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 849 Plumbing
- 5.8K Radiant Heating
- 372 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 39 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements