Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
frame floor radiant detaining
Royboy2
Member Posts: 16
Anyone care to weigh in on preferred detailing for under sub-floor hydronic radiant ystems? I've done numerous systems but all in slabs to date. I generally use cross-linked poly tubing with an oxygen barrier and would like use this in a frame floor system. Wondering about just clipping the tubing to subfloor with insulation below it in the joist cavity. Are the snap on aluminum fins desirable? Cost effective? Worth making on site from flashing?
Any thoughts about this or other approaches appreciated as well as any pointers towards good system design resources online ...
thanks - Royboy
Any thoughts about this or other approaches appreciated as well as any pointers towards good system design resources online ...
thanks - Royboy
0
This discussion has been closed.
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements