Welcome! Here are the website rules, as well as some tips for using this forum.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!
One zone still looks warm after the thermostats are satisfied
I noticed one room was staying warmer than expected after the thermostats had stopped calling for heat.
I used a thermal camera to scan the accessible zone valves and nearby piping. Most of the zones had cooled down, but one valve and the pipe after it were still showing a warmer pattern.
That narrowed the problem from “why is the house still heating?” to one specific zone. I’m trying to work out whether I should start with the valve itself, the control wiring, or possible ghost flow.
Poll: What would you check first?
- Zone valve not closing fully
- End switch or relay still calling
- Ghost flow through the zone
- Circulator running longer than it should
- Need the piping and control details first
Comments
-
need more info, including brand and model
Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0
Categories
- All Categories
- 87.9K THE MAIN WALL
- 3.3K A-C, Heat Pumps & Refrigeration
- 60 Biomass
- 430 Carbon Monoxide Awareness
- 136 Chimneys & Flues
- 2.2K Domestic Hot Water
- 6K Gas Heating
- 124 Geothermal
- 170 Indoor-Air Quality
- 3.9K Oil Heating
- 80 Pipe Deterioration
- 1.1K Plumbing
- 6.7K Radiant Heating
- 397 Solar
- 16.2K Strictly Steam
- 3.5K Thermostats and Controls
- 56 Water Quality
- 52 Industry Classes
- 51 Job Opportunities
- 18 Recall Announcements
