Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Some Steamers

EzzyT
EzzyT Member Posts: 1,377
in Strictly Steam

Both of old failed boilers where way oversized.

IMG_2165.jpeg IMG_2433.jpeg IMG_2434.jpeg IMG_2476.jpeg IMG_2475.jpeg IMG_2477.jpeg
E-Travis Mechanical LLC
Etravismechanical@gmail.com
201-887-8856
Alan (California Radiant) ForbesPaul S_3Ironmanmattmia2PC7060HeatingHelp.com

Comments

  • Steamhead
    Steamhead Member Posts: 18,000

    Looks good, as usual. Question- what are you using the green Taco relays for?

    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • 109A_5
    109A_5 Member Posts: 2,870
    https://forum.heatinghelp.com/discussion/comment/1867599#Comment_1867599

    I suspect an easy interface for smart thermostat provision and /or actual installation.

    National - U.S. Gas Boiler 45+ Years Old
    Steam 300 SQ. FT. - EDR 347
    One Pipe System
  • EzzyT
    EzzyT Member Posts: 1,377

    @Steamhead We are using them for smart thermostats interface as @109A_5 has mentioned.

    E-Travis Mechanical LLC
    Etravismechanical@gmail.com
    201-887-8856
  • Steamhead
    Steamhead Member Posts: 18,000

    Oh, OK- didn't know those had a C terminal.

    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • mattmia2
    mattmia2 Member Posts: 14,334

    I think half the battle here is showing up with a truck full of fittings and most installers seem to lose that part.

  • dandub1960
    dandub1960 Member Posts: 20

    Looks great. I like how you managed to move the left steam connection of the Williamson with an extra elbow. I may copy that.

    Also were you tempted to install the Bermuda backwards to put the drafthood (and exhaust vent) toward the chimney?

Categories