Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Lennox Pulse Furnace “tune up” parts

georgia1219
Member Posts: 1
in Gas Heating
Hello,
We have a 1982 model Pulse Furnace. Yes it was serviced for the recall.
Are the three needed parts for a tuneup available online and what are they?
The local dealer says he can’t get these parts.
0
Comments
-
you need special tools too
0 -
Parts are no longer made for that furnace for a very good reason. Lennox stopped supporting that furnace decades ago. You might be able to find parts somewhere but its well past the point where that furnace should be replaced. It's a 43 year old furnace with a tendency to fail and cause carbon monoxide poisoning. One of my customers dog died from CO poisoning from a Pulse furnace.
Don't waste your money on parts. Budget towards replacing the furnace and buy some low level CO monitors.
2
Categories
- All Categories
- 86.8K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 107 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 105 Geothermal
- 160 Indoor-Air Quality
- 3.6K Oil Heating
- 69 Pipe Deterioration
- 954 Plumbing
- 6.3K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements