Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

"This is Captain America Callin.Callin...catch me now I'm Fallin...." The Kinks

Options
Mad Dog_2
Mad Dog_2 Member Posts: 7,241
Callin' out all over the world...anywhere USA... Will travel...Need Burnham V-9A Front and rear sections. Two sets...would be great or even piecemeal from several sources. Need ASAP. You can PM Me. or Call 516.322.2881 Thanks kids. Mad Dog

Comments

  • Mad Dog_2
    Mad Dog_2 Member Posts: 7,241
    Options
    C'mon Burnham wholesalers and Supply house across the Fruited Plain...I know you gave them in the warehouse. .someones got them.  Mad Dog 
  • Mad Dog_2
    Mad Dog_2 Member Posts: 7,241
    Options
    We are able to get some mid sections but no ends yet!  Mad 🐕 
  • Mad Dog_2
    Mad Dog_2 Member Posts: 7,241
    Options
    I am stunned i haven't had anyone from Burnham or A Manufactures rep aside from the Great Jake Greenwood of Venco who is checking in NY Metro Area.  A presence at The Wall helps everyone. Any neighbors in Ohio, Connecticut,  NH Maine, Delaware,  Maryland, Virginia,  Vermont Penna?  We are willing to come to you to take them back.  Glenn Stanton...I miss you buddy.  Mad Dog 
  • Steamhead
    Steamhead Member Posts: 17,003
    Options
    Dawg, I tried R.E. Michel's site. The catalog number for the front section is 2W801, and their system says there are 10 at the central distribution warehouse in "Glen Burnout".

    The number for the back section is 2W802, but it's not even coming up. This may or may not mean they don't have any, since they just put in a new computer system which is a real mess, to say the least. One of my favorite counter guys retired rather than deal with it. You might just have to call down there to find out for sure.
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • Mad Dog_2
    Mad Dog_2 Member Posts: 7,241
    Options
    Frankie.  Thank you brother. Are they in Maryland?   Matt
  • Steamhead
    Steamhead Member Posts: 17,003
    Options
    Yup. Glen Burnout is a nickname for Glen Burnie. It's just southwest of Baltimore City, and has the dubious distinction of hosting the Motor Vehicle Administration's main office. You know, the one with the sign over the main entrance that says "Abandon All Hope, Ye Who Enter Here"........
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
    WMno57
  • flat_twin
    flat_twin Member Posts: 353
    Options
    Thanks for the ear worm. All I can hear now is Ray Davies singing in my head.
    Mad Dog_2
  • archibald tuttle
    archibald tuttle Member Posts: 1,090
    Options
    is this a 'kit build' you're working on to get some ends for midsections your already have or you've got jobs with bad front and rear sections (or maybe connections between front and rear sections and a middle section). seems to me there was discussion of thermal shock problems with big setbacks and or outdoor reset controls on these commercial units where burnham is delivering now with a modulated bypass based on comparing boiler and return temps.

    ironically, maybe on direct systems the standard of holding off circulation until the boiler heats is actually contraindicated albeit early or 'purge' circulation is going to give you more condensation issue, you won't get as much thermal shock.

    in any event @ChrisMitch might be able to work backwards from manufacturer to distributor to see who might have some 'on the shelf', i.e. on a pallet somewhere.
  • Mad Dog_2
    Mad Dog_2 Member Posts: 7,241
    Options
    Were just trying to get them heat going  because a new boiler is 3 to 4 months out and atleast some sections are available so were piecemeaking it.  Mad Dog
  • Mad Dog_2
    Mad Dog_2 Member Posts: 7,241
    Options
    Steamhead to the rescue!! He tracked them down to RE Michelson in Glen Burnie Maryland.  I called them and they are sending to a branch on Middletown NY which is much closer.  Thank you so much Frank!   Mad Dog
    Erin Holohan Haskellrick in Alaska
  • Mad Dog_2
    Mad Dog_2 Member Posts: 7,241
    Options
    Erin thank you so.much for hunting down more.  i really appreciate that!   What a great RESOURCE HH and The Wall is for professional. Ya got the best in the business on Speed Dial!!!!  Mad Dog 

    Erin Holohan Haskellratio
  • Steamhead
    Steamhead Member Posts: 17,003
    Options
    Pictures!
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • Mad Dog_2
    Mad Dog_2 Member Posts: 7,241
    Options
    You want pictures of the sections??? You are as Mad as I.....You got it, Frankie!!!! Mad Dog