Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Has Gorton changed it vent sizing?
gfrbrookline
Member Posts: 753
I have two gorton vents both labeled as size C that have been purchased in the past two years that the vent holes are very different in size. Is this just a quality control issue or have others noticed this as well. I am guessing the smaller one should be a 6 not a C.
cid:B443D435-DC04-42E4-BE9B-FC17736E51B0
cid:376E4B72-C997-4368-82B4-ADEFAA699372
cid:B443D435-DC04-42E4-BE9B-FC17736E51B0
cid:376E4B72-C997-4368-82B4-ADEFAA699372
0
Comments
-
I think you're right. It was probably a production mistake.All Steamed Up, Inc.
Towson, MD, USA
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Consulting0 -
I seem to recall someone else seeing this. I also recall Gorton or MoM having switched back from a poor quality manufacturing partner but my memory is not to be trusted
NJ Steam Homeowner.
Free NJ and remote steam advice: https://heatinghelp.com/find-a-contractor/detail/new-jersey-steam-help/
See my sight glass boiler videos: https://bit.ly/3sZW1el0
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 916 Plumbing
- 6K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements