Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Smith GB100 Not Igniting
MikeRossini
Member Posts: 1
in Gas Heating
Good morning! My boiler has pilot lit, and a new damper. When Tstat calls for heat, circulator operates, zone LED lights up, damper does not open, hence the boiler does not ignite. Any suggestions?
0
Comments
-
Try turning the switch on the damper to manually open it. Then report back.Bob Boan
You can choose to do what you want, but you cannot choose the consequences.0
Categories
- All Categories
- 84.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 54 Biomass
- 421 Carbon Monoxide Awareness
- 58 Chimneys & Flues
- 1.8K Domestic Hot Water
- 5K Gas Heating
- 124 Geothermal
- 158 Indoor-Air Quality
- 3.2K Oil Heating
- 57 Pipe Deterioration
- 830 Plumbing
- 5.6K Radiant Heating
- 373 Solar
- 14.3K Strictly Steam
- 3.1K Thermostats and Controls
- 55 Water Quality
- 42 Industry Classes
- 83 Job Opportunities
- 24 Recall Announcements