Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Trunk line problem

gyrfalcon
gyrfalcon Member Posts: 178
in THE MAIN WALL
Hello again !  I was helping my brother in law do some insulation in his Crawlspace and he mentioned the rust on the hvac trunk.  I looked and found it to be totally rotted out in one section, toward one end of the length.  The condensation pipe is dripping right on the sheet metal, rotting it out.  We are having some contractors take a look.  Question, can trunk line sections be removed and replaced at each seam where the S clamps hold the section to the next? 
Slant Fin Galaxy GG100(1986) , 2 zone hot water baseboard, T87 Honeywell thermostats. 

Comments

  • mattmia2
    mattmia2 Member Posts: 10,702
    yes.
  • Zman
    Zman Member Posts: 7,610
    If it is a standard size, you should be able to pick it up at your local supplier. Don't for get to wear gloves and buy band aids. :)
    "If you can't explain it simply, you don't understand it well enough"
    Albert Einstein
    mattmia2
  • pedmec
    pedmec Member Posts: 1,013
    yes, add a short piece and a canvas connector to allow for ease of installation.

Categories