Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Too early?

Steve Minnich
Steve Minnich Member Posts: 2,755
I made this for my 2 year old grandson. 
Steve Minnich
Minnich Hydronic Consulting & Design, LLC
[email protected]
DJD775hot_rodWMno57EdTheHeaterMan109A_5Dave CarpentierErin Holohan HaskellPC7060

Comments

  • mattmia2
    mattmia2 Member Posts: 5,506
    too well made. when i was that young i was given tools that were made in soviet eastern europe that were useless. i just threw a bunch of them away recently cleaning out my mom's house.
    Steve Minnich
  • hot_rod
    hot_rod Member Posts: 16,278

    I made this for my 2 year old grandson. 

    Never too early. For them or you :) I bring 2 year old Luca in the shop as often as possible.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
    Steve Minnich
  • Steve Minnich
    Steve Minnich Member Posts: 2,755
    @mattmia2 “too well made”?

    One hundred years from now they will…
    ah never mind. 
    Steve Minnich
    Minnich Hydronic Consulting & Design, LLC
    [email protected]
  • Steve Minnich
    Steve Minnich Member Posts: 2,755
    That’s what I was thinking. This is my first time using a wood burning set since I was kid. I’ll put it on the bottom in case it doesn’t look great. 
    Steve Minnich
    Minnich Hydronic Consulting & Design, LLC
    [email protected]
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 11,987
    Maybe a pipe wrench on it!!!!
  • DanHolohan
    DanHolohan Member, Moderator, Administrator Posts: 15,962
    Beautiful, Steve. Thanks for sharing this with us. 
    Retired and loving it.
    Steve Minnichmattmia2
  • Steve Minnich
    Steve Minnich Member Posts: 2,755
    Maybe a pipe wrench on it!!!!
    I wanted to do that. I traced a 10” Ridgid on a piece of paper but that didn’t do it justice. Lots of detail even with drawing a pipe wrench with a pencil let alone a wood burner. 
    Steve Minnich
    Minnich Hydronic Consulting & Design, LLC
    [email protected]