Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Confusion over new boiler sizing
Comments
-
That’s wayyy better than most people get. Good job getting the smaller one, don’t worry about if you add another small radiator or hot water loop, it can handle it. There’s a lot of padding in the net sq ft of steam value.
it takes a week or two of normal firing with several skims before it’s clean, don’t sweat the condensation in the glassNJ Steam Homeowner.
Free NJ and remote steam advice: https://heatinghelp.com/find-a-contractor/detail/new-jersey-steam-help/
See my sight glass boiler videos: https://bit.ly/3sZW1el1 -
It took me several months and finally a washing using the wand.ethicalpaul said:That’s wayyy better than most people get. Good job getting the smaller one, don’t worry about if you add another small radiator or hot water loop, it can handle it. There’s a lot of padding in the net sq ft of steam value.
it takes a week or two of normal firing with several skims before it’s clean, don’t sweat the condensation in the glass
Single pipe 392sqft system with an EG-40 rated for 325sqft and it's silent and balanced at all times.
0
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 938 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements