Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Dunkirk Q95-200m replacement

Ironman
Ironman Member Posts: 7,677
edited April 2022 in THE MAIN WALL
I’ve done a lot of repairs on this mess over the last dozen+ years. It finally bit the dust with a leaking tail piece on the aluminum block.


Here’s what replaced it:


Bob Boan
You can choose to do what you want, but you cannot choose the consequences.
mattmia2JakeCKSTEVEusaPA

Comments

  • Ironman
    Ironman Member Posts: 7,677
    Not every detail was finished when I took the pics.
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
    PC7060luketheplumber
  • EBEBRATT-Ed
    EBEBRATT-Ed Member Posts: 17,280
    Looks good. Must have taken a little planning to crimp those joints
    Ironman
  • mattmia2
    mattmia2 Member Posts: 11,872
    Is that huge galvanized pipe to the old boiler gas?
    luketheplumber
  • Ironman
    Ironman Member Posts: 7,677
    edited April 2022
    mattmia2 said:
    Is that huge galvanized pipe to the old boiler gas?
    Yes. There were two boilers before the Dunkirk.

    The house is kinda like a duplex that had two gas and two electric services. The original portion dates back to the 1790’s.
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
    mattmia2
  • Ironman
    Ironman Member Posts: 7,677
    EBEBRATT-Ed said:
    Looks good. Must have taken a little planning to crimp those joints
    I got a new toy from Viega that I used.


    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
    JakeCK
  • JakeCK
    JakeCK Member Posts: 1,496
    One of these summers I still need/want to relocate and redo the plumbing around my boiler... I'm seriously thinking I might just rent a propress and bite the bullet with the costly fittings. Life is too short. 

Categories