Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Weil McLain Series 2 Ultra boiler
Tom_133
Member Posts: 912
Got a call for a bad heat exchanger. Picked up the new kit and headed to it.
I found a boiler that hasn't been as much as breathed on in the last 10 years.
It was STILL running. It had a hole in the bottom of the heat exchanger. The bolts that hold the burner cover plate were loose and it had burned a hole on the side of the front cover. But the thing that really got me was the condition of the igniter that still worked!! It had a 7/8" gap!! I told the customer it may be good to at the very least to get on a 5 year maintenance program... yes, I was tongue in cheek with that.
I found a boiler that hasn't been as much as breathed on in the last 10 years.
It was STILL running. It had a hole in the bottom of the heat exchanger. The bolts that hold the burner cover plate were loose and it had burned a hole on the side of the front cover. But the thing that really got me was the condition of the igniter that still worked!! It had a 7/8" gap!! I told the customer it may be good to at the very least to get on a 5 year maintenance program... yes, I was tongue in cheek with that.
Tom
Montpelier Vt
Montpelier Vt
3
Categories
- All Categories
- 86.5K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 94 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 156 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 926 Plumbing
- 6.1K Radiant Heating
- 383 Solar
- 15.1K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements