Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
IBC DC 33-160 gas fired boiler for heat hot water
PDC
Member Posts: 1
We have a new boiler that was installed by a licensed professional but the system is unreliable. We have had several service calls for it since the install 3 years ago. It has run too hot and shut itself down during cold snaps one winter. We get the same error message at least once or twice a year saying sensor fault s1. I have to restart the system and it eventually clears. They have been out several times and once they had to replace the sensor but it still happens. Any suggestions?
0
Comments
-
Somebody needs to contact tech support at IBC. They would prefer it be a service person in front of the boiler. And an ideal time would be when the boiler has thrown an error message.0
-
Curious as to the piping and as to the system it runs.
Baseboard set up? What temps does it run at ? Does it have the outdoor sensor wired in to it?
Can you give us more details?
Have to checked the IBC website to get a tech out recommended by IBC?
They in my experience have been pretty reliable.
https://www.ibcboiler.com/
1
Categories
- All Categories
- 86.5K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 423 Carbon Monoxide Awareness
- 94 Chimneys & Flues
- 2K Domestic Hot Water
- 5.5K Gas Heating
- 101 Geothermal
- 156 Indoor-Air Quality
- 3.5K Oil Heating
- 64 Pipe Deterioration
- 927 Plumbing
- 6.1K Radiant Heating
- 383 Solar
- 15.1K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 48 Job Opportunities
- 17 Recall Announcements