Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
EXISTING TRIANCO HEATMAKER WALL TERMINATION
BillyO
Member Posts: 277
in Gas Heating
I have an existing concentric trianco wall termination on 8th floor of building that obviously cant be removed. I would like to modify to accept LAARS mascot exhaust and fresh air. Any thoughts? Any input greatly appreciated
0
Comments
-
Have you contacted Laars?
Tread carefully here.... unless you get the ok in writing you are liable if there is an issue.0 -
"If you can't explain it simply, you don't understand it well enough"
Albert Einstein0
Categories
- All Categories
- 85.9K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 420 Carbon Monoxide Awareness
- 78 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 94 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 59 Pipe Deterioration
- 884 Plumbing
- 5.9K Radiant Heating
- 377 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 51 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements