Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
recommended make/model of condensate pump for mini-split?

weil_fail
Member Posts: 84
hey,
I plan to install a condensate pump to push mini-split condensate up about 11-12ft. it's a 9k btu indoor unit. any recommended products for this? what's the best way to push water that high? any tips/tricks for best results?
I plan to install a condensate pump to push mini-split condensate up about 11-12ft. it's a 9k btu indoor unit. any recommended products for this? what's the best way to push water that high? any tips/tricks for best results?
0
Comments
-
Little Giant.0
-
Find a new location for the head.
Hot air rises, cold air falls............….Pumps fail, Walls and ceilings get damaged.0 -
Why not drain it down into your crawl space and pump or gravity drain it from there0
-
@EBEBRATT-Ed , I wish that was an option. unfortunately, I have to go up first.0
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 940 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements