Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.

Truly, a great deal.

Steve Minnich
Steve Minnich Member Posts: 2,673


My wife and I are moving west. Actually, my wife and dog Little Man, have already moved west. I'm still back in the Chicago area getting this house ready to sell and paring down on some extra things that I no longer need. As you can see, I take care of my things. The tools pictured here were used in my shop only. I have priced them to move. I'm not looking to retire off this. : )

Total cost for everything here is $1750.00 firm, non-negotiable. I threw in the heatinghelp mouse pad and the B&G desk mats to help push you over the edge.

And, as gasoline is cheap and I happen to have some time now. I'm willing to deliver anywhere with 120 miles of Elk Grove Village, Illinois; either to your shop or a meeting place, your call.

The best way to get a hold of me is via email - [email protected]

I have to move these so if there is no interest here, I'll be posting this to Instagram and local supply houses.
Steve Minnich
Minnich Hydronic Consulting & Design, LLC
[email protected]

Comments

  • STEVEusaPA
    STEVEusaPA Member Posts: 5,292
    Steve, What's in the 2 Milwaukee cases, can't exactly tell from the pics.
    steve
  • Steve Minnich
    Steve Minnich Member Posts: 2,673
    @STEVEusaPA - 12v bandsaw and 12v tubing cutter. 👍
    Steve Minnich
    Minnich Hydronic Consulting & Design, LLC
    [email protected]
  • Tom_133
    Tom_133 Member Posts: 766
    Thats a great deal, when you asking for the price of the threader and basically throwing the rest in for free!! I cant afford it currently, but its a steal for someone
    Tom
    Montpelier Vt
    Steve Minnich
  • Steve Minnich
    Steve Minnich Member Posts: 2,673
    @Tom_133 You’re right. And the threader was used less than a year because I retired from contracting in October, 2018.
    Steve Minnich
    Minnich Hydronic Consulting & Design, LLC
    [email protected]
  • Ironman
    Ironman Member Posts: 6,547
    That is a great deal. If didn't already have all those, I'd buy in a heartbeat.
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
    Steve Minnich
  • Steve Minnich
    Steve Minnich Member Posts: 2,673
    @Ironman - I know it’s tough out there for everyone now. That’s one of the reasons I priced them as I did. The other is I hate to see good tools not being put to use. It won’t be the end of the world if they have to move with me.
    Steve Minnich
    Minnich Hydronic Consulting & Design, LLC
    [email protected]
  • Ironman
    Ironman Member Posts: 6,547
    To where are you moving?
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
  • Steve Minnich
    Steve Minnich Member Posts: 2,673
    Henderson, NV, 10-15 to Vegas one way and 10-15 minutes to Boulder City the other way.

    My wife has family there and starts her new job Monday. She’s a Certified Nurse-Midwife. I can do my job from anywhere now.
    Steve Minnich
    Minnich Hydronic Consulting & Design, LLC
    [email protected]
  • Steve Minnich
    Steve Minnich Member Posts: 2,673
    I’ve never been a gambler and no plans to start. Not sure how I avoided that vice? 😎
    Steve Minnich
    Minnich Hydronic Consulting & Design, LLC
    [email protected]
  • Steamhead
    Steamhead Member Posts: 14,829
    All Steamed Up, Inc.
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • You're getting closer to me. May have to up my advertising.
    Often wrong, never in doubt.
  • Steve Minnich
    Steve Minnich Member Posts: 2,673
    @Steamhead @Alan (California Radiant) Forbes - I retired from contracting in October, 2018. Mind was willing, but my body quit. Consulting, designing, writing, and working on my own place at a much slower pace is what keeps me in the game now.
    Steve Minnich
    Minnich Hydronic Consulting & Design, LLC
    [email protected]
    Alan (California Radiant) Forbes
  • Maybe some time to do some exploring as well. Utah and New Mexico have a lot to offer. If you're a mountain biker, Moab is a mecca.
    Good luck to you and your wife.
    Often wrong, never in doubt.
  • Steve Minnich
    Steve Minnich Member Posts: 2,673
    Thanks Alan. My wife is mountain biker, long distance biker, swimmer, and runner. I’m happy if I can make it around the block walking. 😎
    Steve Minnich
    Minnich Hydronic Consulting & Design, LLC
    [email protected]
    Alan (California Radiant) Forbes
  • hot_rod
    hot_rod Member Posts: 15,004
    > @Steve Minnich said:
    > Thanks Alan. My wife is mountain biker, long distance biker, swimmer, and runner. I’m happy if I can make it around

    I started doing some yoga, a nice low impact stretch that you can do must anywhere. Weather is nice so yoga outside is fun, watching the clouds roll by.
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • Steve Minnich
    Steve Minnich Member Posts: 2,673
    @hot_rod A few years back, my daughters were doing hot yoga every Sunday morning. They may have mentioned that it wasn’t easy?

    4-5 minutes into my first session, the instructor walks over and asks if I’m ok. My response - “Oh yeah, I got this.”

    2-3 minutes later, he returns and says - “You’re not looking too good. Maybe you should take a break.” I let’m know that I’m a Boiler Guy and I swing wrenches that weigh 50 pounds all day long, every day of the week.” He walks away looking back over his shoulder, shaking his head.

    A minute or two go by and he’s back, grabbing me by the arm and escorting me to a safe place where I can no longer hurt myself with stubborn pride.

    I couldn’t breathe, was drenched in sweat, and my legs were wobbly.

    So Bob, before I commit to just “yoga”, I need some reassurances. 😎
    Steve Minnich
    Minnich Hydronic Consulting & Design, LLC
    [email protected]
    GroundUp
  • hot_rod
    hot_rod Member Posts: 15,004
    My wife has been doing yoga for many years, she is my instructor here at home, so I am starting out super simple, 30 minutes of some easy basics, mostly core and back stuff for my aging back

    I think the key is to start at your comfort level, not the instructors👌
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
    Steve Minnich
  • Most projects coming to me are design/build, but every now and then I get a customer that wants to have multiple bids on their project and don't have plans. I'll send them your way.
    Often wrong, never in doubt.
    Steve Minnich
  • Steamhead
    Steamhead Member Posts: 14,829

    @Steamhead @Alan (California Radiant) Forbes - I retired from contracting in October, 2018. Mind was willing, but my body quit. Consulting, designing, writing, and working on my own place at a much slower pace is what keeps me in the game now.

    Well, they might need you for that as well.........
    All Steamed Up, Inc.
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
    Steve Minnich
  • Steve Minnich
    Steve Minnich Member Posts: 2,673
    The lot of tools have been sold. Thank you, Erin, for having this category. It was very helpful.
    Steve Minnich
    Minnich Hydronic Consulting & Design, LLC
    [email protected]
  • Erin Holohan Haskell
    Erin Holohan Haskell Member, Moderator, Administrator Posts: 1,692
    You're welcome, Steve. And best wishes to you and your wife on your move.
    President
    HeatingHelp.com
  • Steve Minnich
    Steve Minnich Member Posts: 2,673
    Thank you, Erin.
    Steve Minnich
    Minnich Hydronic Consulting & Design, LLC
    [email protected]
    Erin Holohan Haskell