Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Thermostat that will hold for a set time

Hi folks,

Sorry if this has been asked before. I couldn't find a thread. I'm looking to buy a thermostat with a feature that will hold on a timer. This is different from a temporary hold which only lasts until the next schedule change. Basically, I want to hit hold, enter a duration (eg 2 hours) and walk away.

Does anyone know a way I can do this? Thanks.


    HVACNUT Member Posts: 5,736
    Honeywell Prestige IAQ
  • ratio
    ratio Member Posts: 3,601
    In addition to the Prestige the 8000 series, when set to commercial mode, offer a timed override. A commercial use version of the Carrier Edge Pro will do it too. I dare say most commercial-type stats will function that way.
  • DPronto
    DPronto Member Posts: 7
    Thanks guys, if that's the case I should be sitting pretty.
  • pmarinello489
    pmarinello489 Member Posts: 23
    any of the honeywell T thermostats do it. T5 to the T10 I am almost certain. At least with my experience t5, t6, t9, and t10 all have the feature.