Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Be careful out there!

Robert O'Brien
Robert O'Brien Member Posts: 3,556
in THE MAIN WALL
https://abcnews.go.com/International/wireStory/heating-pipe-bursts-russian-hotel-boiling-water-kills-68398116
To learn more about this professional, click here to visit their ad in Find A Contractor.

Comments

  • Steamhead
    Steamhead Member Posts: 17,213
    District high-pressure hot-water IIRC.
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
    Zman
  • Solid_Fuel_Man
    Solid_Fuel_Man Member Posts: 2,646
    I'm sure rules and regs are different in Russia.

    All of the district HPHW (200psi) I've worked on has a big flat plate HX in the "boiler room" and had normal 30-50 psi reliefs and 180 or less operating temps in the building. No HPHW was allowed to be in the building accept for the stubs in the mechanical room. It was still scary stuff! All welded SCH 80. it's crazy how much energy can go through a pair or 1" pipes.
    Serving Northern Maine HVAC & Controls. I burn wood, it smells good!

Categories