Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Commercial Radiant

Dan Foley
Dan Foley Member Posts: 1,264
edited July 2019 in Radiant Heating
Brian and his crew started this commercial radiant project today. He is installing radiant floor heat in two levels of this healthcare facility going up about halfway between DC and Baltimore.

We have had heavy rain the past three days so the site was a giant mud hole. But concrete waits for no one so we slogged through the mud to get two zones roughed in today.

Comments

  • Alan (California Radiant) Forbes
    Alan (California Radiant) Forbes Member Posts: 4,214
    I like the insulation to prevent overheating, although I'm sure the cat is pissed.
    8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

    Two btu per sq ft for degree difference for a slab
    Rich_49Dan FoleyHenry
  • Erin Holohan Haskell
    Erin Holohan Haskell Member, Moderator, Administrator Posts: 2,354
    Nice work, guys!

    President
    HeatingHelp.com

    Dan Foley
  • STEVEusaPA
    STEVEusaPA Member Posts: 6,505
    I'd be watching it like a hawk when they poured the concrete (I assume you were there).

    There was an error rendering this rich post.

  • Dan Foley
    Dan Foley Member Posts: 1,264
    We pressurize to 100 PSI and monitor the concrete pour. I learned the hard way what happens when you don’t.

Categories