Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

HydroSketch

Steve Minnich
Steve Minnich Member Posts: 2,859
in THE MAIN WALL
Based on some recent threads, I decided to give it a shot. The mod con was my first attempt. The high mass boiler that followed was much better. @Siggy nailed it! My next step is to import Caleffi, Lochinvar, and Viessmann stencils/templates. This is really fun stuff.

Steve Minnich
delta T

Comments

  • Tom_133
    Tom_133 Member Posts: 913
    Steve

    You got waaaay further than me! I could not get the line colors to change, I was sorta stuck
    Tom
    Montpelier Vt
  • Steve Minnich
    Steve Minnich Member Posts: 2,859
    @Tom_133 You’ll get it. If I can do it, anyone can do it.
    Steve Minnich
  • hot_rod
    hot_rod Member Posts: 23,887
    The line color could be the browser software, are you running Chrome, Firefox? I had problems with Safari but it works well with Chrome.

    You got waaaay further than me! I could not get the line colors to change, I was sorta stuck


    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
  • Steve Minnich
    Steve Minnich Member Posts: 2,859
    @hot_rod or other - In the Toolbox menu on the left hand side, I can't see the bottom two icons, electrical and the bottom one? I'm opening the software in Google Chrome so that's not it. I don't see how I can scroll down? Scrolling down on the drawing is no problem. Any tips?
    Steve Minnich
  • Steve Minnich
    Steve Minnich Member Posts: 2,859
    I got it. Not the best at this.
    Steve Minnich

Categories