Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
HydroSketch
Tinman
Member Posts: 2,808
Based on some recent threads, I decided to give it a shot. The mod con was my first attempt. The high mass boiler that followed was much better. @Siggy nailed it! My next step is to import Caleffi, Lochinvar, and Viessmann stencils/templates. This is really fun stuff.
Steve Minnich
1
Comments
-
Steve
You got waaaay further than me! I could not get the line colors to change, I was sorta stuck
Tom
Montpelier Vt0 -
The line color could be the browser software, are you running Chrome, Firefox? I had problems with Safari but it works well with Chrome.
You got waaaay further than me! I could not get the line colors to change, I was sorta stuck
Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream0 -
@hot_rod or other - In the Toolbox menu on the left hand side, I can't see the bottom two icons, electrical and the bottom one? I'm opening the software in Google Chrome so that's not it. I don't see how I can scroll down? Scrolling down on the drawing is no problem. Any tips?Steve Minnich0
-
I got it. Not the best at this.Steve Minnich0
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 129 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 879 Plumbing
- 5.9K Radiant Heating
- 375 Solar
- 14.6K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements