Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

RTU Replacement

Dan Foley
Dan Foley Member Posts: 1,260
in THE MAIN WALL
It has been in the 90's here in DC for the past week. Luckily it cooled off a little and was overcast today.

We replaced a rooftop unit in this restaurant in Sterling VA this morning. We don't typically do restaurant work due to slow/no pay but this was an exception as I know the owners.

We had already replaced two other RTUs in this building last year.

Out with the old.

Comments

  • Dan Foley
    Dan Foley Member Posts: 1,260
    In with the new Trane gas pack and curb adapter.
  • Dan Foley
    Dan Foley Member Posts: 1,260
    Here are the two we replaced last year.
  • GroundUp
    GroundUp Member Posts: 2,078
    Looks good! My boss would have a heart attack if he saw that many guys on the roof for an RTU that size lol.
  • Dan Foley
    Dan Foley Member Posts: 1,260
    Safety. An extra crew to disconnect the old and set the new. A two man crew finished up. Me? I just watched and took pictures.
  • ratio
    ratio Member Posts: 3,777
    Nice.

    How long was the sign truck on site? I used to hump to get them gone, but since they went to a 4 hour minimum, I don't work so hard to get them on the road again.

  • Dan Foley
    Dan Foley Member Posts: 1,260
    4 hour min. He was there less than 2 hours.
  • HVACNUT
    HVACNUT Member Posts: 6,263
    The rigger doesn't deliver and haul away?
  • ratio
    ratio Member Posts: 3,777
    We'll send the big'uns, 50 tons & up, to the yard; most other things come to us. We have a nice dock to unload at & space to store equip usually, so it works out.

    Like I said, I used to bust rear end to get the crane back on the road, but with a 4 hour minimum there's no reason to hustle that much.

  • hvacfreak2
    hvacfreak2 Member Posts: 500
    Reliatel Inside.
    hvacfreak

    Mechanical Enthusiast

    Burnham MST 396 , 60 oz gauge , Tigerloop , Firomatic Check Valve , Mcdonnell Miller 67 lwco , Danfoss RA2k TRV's

    Easyio FG20 Controller

    Dan Foley
  • AMservices
    AMservices Member Posts: 610
    Working down south (George) the "good O boys" had a name for that work
    "Gravy"
    Way too work!
    Dan Foley

Categories