Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

urinal with internal p-trap

Total1
Total1 Member Posts: 44
I'm buying a used urinal with internal p-trap , from the back out the urinal is is 1 1/2 inch abs . Do you need another p-trap or run it directly into the main plumbing stack ? Thanks people . ( great forum here )

Comments

  • Total1
    Total1 Member Posts: 44


    this is what the urinal looks like .
  • Steamhead
    Steamhead Member Posts: 17,274
    I doubt it needs a separate trap. You might want to check with the manufacturer. But whatever you do, don't p**s off the plumbing inspector :D:D:D (couldn't resist)
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • Ironman
    Ironman Member Posts: 7,489
    Just like with a water closet, the internal trap is all that's required.

    You'll need a urinal flange, gasket and bolts to connect it to the waste line.
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.
  • Total1
    Total1 Member Posts: 44
    thanks , All installed with one p-trap . It is better to P*ss off a plumbing inspector than to p*ss on one ,, LOL ,,, The urinal is working awesome ...