Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Another steamer

EzzyT
EzzyT Member Posts: 1,344
We ripped out a leaky Slant/Fin and installed a Williamson GSA-125 with of course a drop header. Removed the bullhead tees that both steam mains and dry returns were connected to and piped them separately on the header and to the wet return.
Replaced about of 10’ section of 2” copper that was on one of the steam mains and replaced with steel and iron.
Homeowner already had the Big Mouth Vents installed but we just repiped on the how they were piped.
E-Travis Mechanical LLC
Etravismechanical@gmail.com
201-887-8856
New England SteamWorksDave0176R DouganLionA29

Comments