Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Crane push nipples
Options
Jeff Perry_3
Member Posts: 99
Anyone know of availability of push nipples for Crane baseboard? Hoping there's someone out there with new old stock.
Thanks
Jeff Perry
Thanks
Jeff Perry
0
Comments
-
Most likely your going to have to have a machine shop make them for you. There are companies that rebuild radiators who would know where to go.
There is a supply house in NEw York or NJ I believe that might have them available. Can't remember the name.
Maybe others will respond0 -
Are they different from Baseray? You can still get those from Burnham.Bob Boan
You can choose to do what you want, but you cannot choose the consequences.0 -
Shafter in Montreal has them0
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 850 Plumbing
- 5.8K Radiant Heating
- 372 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 58 Water Quality
- 39 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements