Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

boiler help!

adifasi
adifasi Member Posts: 2
edited September 2017 in THE MAIN WALL
I have an oil boiler (250,000BTU 217,000 Net 1 1/2 pipe), would like piping drawing for 5 zones: 1. Water heater (indirect) 2. heat exchanger(for radiant floor 11,000 sqft) 3. 1st floor 4. 2nd floor 5. basement

Comments

  • STEVEusaPA
    STEVEusaPA Member Posts: 6,505
    So you'll need to hire a person to do that. Alot more involved than just drawing a sketch.
    You really need a complete heat loss to determine what you need. From there a drawing can be generated.
    There are people on here who can help you with that.
    One of them who would do a fantastic job, if he's available:
    https://heatinghelp.com/find-a-contractor/detail/ramer-mechanical-llc

    There was an error rendering this rich post.

    HVACNUTdelta THarvey RamerNew England SteamWorks
  • Zman
    Zman Member Posts: 7,611
    I am curious as why you need the heat exchanger?
    "If you can't explain it simply, you don't understand it well enough"
    Albert Einstein
    Grallert

Categories