Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Honeywells9361a2076 or crown part#3505076 replacement
add
Member Posts: 94
in Gas Heating
Hi everyone, being a oil service man for trade, I am curious on how to replace a Honeywell S 9361a2076 or # 3505076 called by crown (atmospheric gas boiler control). If I ever need to replace one, is there a well like the old aquastat, would I need to drain the unit or is as simple as a 1 2 3 like the old fashion aquastats ? I tried to find a video on you tube but i was unsuccessful maybe is a to new of a part?
0
Comments
-
https://customer.honeywell.com/resources/techlit/TechLitDocuments/69-0000s/69-2076.pdf
Looks like '1 2 3' to me. But I'd find out what's in the box, in case the sensors are special order, or if just a sensor goes bad.
One of these could come in handy too:
http://www.onwatchinc.com/gasstick76/index.htmlThere was an error rendering this rich post.
0 -
I have a step by step service procedure I developed if you are interested. It is free just contact me at my e-mail address gastc@cox.net.0
-
The procedure will be going out in the mail tomorrow. Enjoy!0
-
Add did you get what I sent you?0
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 64 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements