Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
UPS for hardwired device
Options
Comments
-
Looks good.
I have a kill-a-watt meter on my mod-con.... when not heating/pumping it draws 5 watts, when heating & pumping for all three baseboard zones it draws a total of 50 watts which includes draw from the ECM CH pump (Grundfos Alpha) and the 40va transformer that operates the three z-wave t-sats and Taco Zone Sentry zone valves.
According to the datasheet for the above 550VA UPS- it would run my whole system while actively heating & pumping for 50 min.
Sweet!0
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 71 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 38 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements