Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
recommendations for big flow shower heads
Mad Dog_2
Member Posts: 7,396
Anybody have a brand they like that's not 500 bucks? Tanks in advance. Mad Dog
0
Comments
-
Speakman anystream. The old ones had a restrictor that was easy to remove
https://www.youtube.com/watch?v=dlrtQb24Qxw2 -
-
-
here - this one isn't $500 - I think its $1,000
and it doubles as a car wash!
0 -
0
-
My beef with the "big rain" ones is there's no pressure. They still seem to be a limp low flow head that's now spread out something awful.
You'd need 5 to 10 gallons a minute to get decent pressure out of the thing.
Single pipe quasi-vapor system. Typical operating pressure 0.14 - 0.43 oz. EcoSteam ES-20 Advanced Control for Residential Steam boilers. Rectorseal Steamaster water treatment1 -
I use those teeney Euro water saver types. I dimple the little plate inside for more flow.For even more flow you can ream the holes a little. I like pressure.0
Categories
- All Categories
- 86K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 52 Biomass
- 420 Carbon Monoxide Awareness
- 80 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.3K Gas Heating
- 96 Geothermal
- 154 Indoor-Air Quality
- 3.3K Oil Heating
- 60 Pipe Deterioration
- 891 Plumbing
- 5.9K Radiant Heating
- 378 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 52 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements