Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Welding fun on a Sunday evening

Options
Gordo
Gordo Member Posts: 857
in THE MAIN WALL


Welding repair of a soot vacuum wheel carriage. The chinese welds didn't hold up. Quelle surprise.
All Steamed Up, Inc.
"Reducing our country's energy consumption, one system at a time"
Steam, Vapor & Hot-Water Heating Specialists
Oil & Gas Burner Service
Baltimore, MD (USA) and consulting anywhere.
https://heatinghelp.com/find-a-contractor/detail/all-steamed-up-inc
LionA29ChrisJSWEI

Comments

  • Fred
    Fred Member Posts: 8,542
    Options
    Cool!
  • Zman
    Zman Member Posts: 7,569
    Options
    Awesome picture.
    I once sold an engine driven welder to a lady from out of state. She wanted to see a video of it running. I just set up an iPad and recorded about 6" of weld. It came out great and she bought it.
    "If you can't explain it simply, you don't understand it well enough"
    Albert Einstein
  • ChrisJ
    ChrisJ Member Posts: 15,713
    Options
    @Bob Bona Check it out, see what happens when guys actually use their soot vac? :)

    Single pipe quasi-vapor system. Typical operating pressure 0.14 - 0.43 oz. EcoSteam ES-20 Advanced Control for Residential Steam boilers. Rectorseal Steamaster water treatment
    Bob Bona_4
  • Sailah
    Sailah Member Posts: 826
    Options
    I always figured you for a TIG man. I have a TIG and love it, can't MIG weld to save my life though.
    Peter Owens
    SteamIQ
  • hot_rod
    hot_rod Member Posts: 22,158
    Options
    Look like an ad in GQ magazine, all that new leather and such
    Bob "hot rod" Rohr
    trainer for Caleffi NA
    Living the hydronic dream
    Gordo
  • JohnNY
    JohnNY Member Posts: 3,231
    Options
    Great photo.
    Contact John "JohnNY" Cataneo, NYC Master Plumber, Lic 1784
    Consulting & Troubleshooting
    Heating in NYC or NJ.
    Classes
  • Gordo
    Gordo Member Posts: 857
    Options
    @Sailah : Haven't done any TIG welding since college. It does make the prettiest welds, though, doesn't it?

    MIG is the hot glue gun of welding ;-) !
    All Steamed Up, Inc.
    "Reducing our country's energy consumption, one system at a time"
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Baltimore, MD (USA) and consulting anywhere.
    https://heatinghelp.com/find-a-contractor/detail/all-steamed-up-inc
    LionA29delta T
  • Sailah
    Sailah Member Posts: 826
    Options
    @Gordo

    I was TIG welding some 7/8-14 nuts to 3/4" plate this weekend making a special puller for my cutless bearing on the boat. My TIG is a 185 amp machine and I was asking for all of em!

    It does just weld beautiful though, nice even dimes.

    The shop next to us has a fab area where they weld heavy steel. They have a biggun Miller Deltaweld 650 that is 100% duty cycle. I've used it a couple times, puts hair on your chest.
    Peter Owens
    SteamIQ
  • Harvey Ramer
    Harvey Ramer Member Posts: 2,239
    edited November 2016
    Options
    But can you do it like this?

    https://www.facebook.com/Weldporn/videos/1272125739498060/
    ChrisJ
  • Bob Bona_4
    Bob Bona_4 Member Posts: 2,083
    Options
    Hey Chris, right, don't ever be nervous about buying a used 'Master!
    ChrisJ
  • ChrisJ
    ChrisJ Member Posts: 15,713
    Options
    Bob Bona said:

    Hey Chris, right, don't ever be nervous about buying a used 'Master!

    Probably won't even need a new filter.
    Single pipe quasi-vapor system. Typical operating pressure 0.14 - 0.43 oz. EcoSteam ES-20 Advanced Control for Residential Steam boilers. Rectorseal Steamaster water treatment
    Bob Bona_4

Categories