Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Clocking gas meter
Options
ratio
Member Posts: 3,640
Question for the gas pros out there. I came across this, regarding meters operating at 1# and above. Unless I miss my guess, it merely accounts for the difference in volume of the gas at pressures much higher than typical. Wouldn't that difference exist at 7-14" inlet too, not just at 1#+? Is it just a matter of the error introduced at 7-14" is insignificant, but at 1#+ it becomes measurable?
0
Categories
- All Categories
- 85.7K THE MAIN WALL
- 3K A-C, Heat Pumps & Refrigeration
- 49 Biomass
- 418 Carbon Monoxide Awareness
- 72 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 92 Geothermal
- 149 Indoor-Air Quality
- 3.2K Oil Heating
- 59 Pipe Deterioration
- 847 Plumbing
- 5.8K Radiant Heating
- 371 Solar
- 14.5K Strictly Steam
- 3.2K Thermostats and Controls
- 50 Water Quality
- 39 Industry Classes
- 47 Job Opportunities
- 15 Recall Announcements