Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

The hydronic distribution design and installation

hot_rod
hot_rod Member Posts: 24,640
in THE MAIN WALL
seems to be by far the place where many hydronic systems take a turn for the worse. After watching the Wall, visiting job sites, fielding tech calls for years we decided to pick a handful of the most common distribution errors. Then start out with some basic concepts and run through the proper design and examples of the common errors.

Let us know if this type of material is helpful and any ideas you may have for future topics of Idronics.

This ones for you Keyote :)





http://www.caleffi.com/sites/default/files/coll_attach_file/idronics_19_na.pdf

Hard copies will mail within the next few weeks.
Bob "hot rod" Rohr
trainer for Caleffi NA
Living the hydronic dream
IronmanSteve Minnich

Comments

  • STEVEusaPA
    STEVEusaPA Member Posts: 6,505
    Very nice, will download on the iPad and wait for the mail...still like reading actual books with paper.
    Thanks

    There was an error rendering this rich post.

    delta TSteve Minnich
  • Gordy
    Gordy Member Posts: 9,546
    Your right I can think of a thread right now. Very nice!
    Steve Minnich

Categories