Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

The need to use technology screwing it up further

Rich_49
Rich_49 Member Posts: 2,769
You didn't get what you didn't pay for and it will never be what you thought it would .
Langans Plumbing & Heating LLC
732-751-1560
Serving most of New Jersey, Eastern Pa .
Consultation, Design & Installation anywhere
Rich McGrath 732-581-3833

Comments

  • Steamhead
    Steamhead Member Posts: 17,387
    Any way we can read this without signing onto LinkedIn?
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
    Zman
  • KC_Jones
    KC_Jones Member Posts: 5,840
    I signed in and still didn't see it, I am guessing one needs to be a member of a group on linkedin to actually see it?
    2014 Weil Mclain EG-40
    EcoSteam ES-20 Advanced Boiler Control
    Boiler pictures updated 2/21/15
  • Gordy
    Gordy Member Posts: 9,546
    Pending member of the group. Give it a while.
    SWEI
  • Steamhead
    Steamhead Member Posts: 17,387
    Thanks, Mark. Google apparently has no clue in this area.
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
    Mark Eatherton
  • BobC
    BobC Member Posts: 5,502
    I am a member of LINKEDIN and what it amounts to is they are sending out untrained people to do these jobs.

    Bob
    Smith G8-3 with EZ Gas @ 90,000 BTU, Single pipe steam
    Vaporstat with a 12oz cut-out and 4oz cut-in
    3PSI gauge
    Mark Eatherton
  • Gordy
    Gordy Member Posts: 9,546
    Back to Angie's list .......lol
    Mark Eatherton
  • BobC
    BobC Member Posts: 5,502
    Those who are just trying to get by on the cheap deserve what they get but some people are really hard up against things and desperately looking to save money.

    When I got out of high school in the '60's the help wanted section was 20 PAGES long, if you had any skills it took a day to find a decent job. Another bonus bought to you by NAFTA and similar trade "agreements".

    The key is to educate people so they know how to differentiate between wannabees and the people who know what they are doing.

    Bob
    Smith G8-3 with EZ Gas @ 90,000 BTU, Single pipe steam
    Vaporstat with a 12oz cut-out and 4oz cut-in
    3PSI gauge
    Mark Eatherton
  • ChrisJ
    ChrisJ Member Posts: 16,316
    edited April 2016
    BobC said:

    Those who are just trying to get by on the cheap deserve what they get but some people are really hard up against things and desperately looking to save money.

    When I got out of high school in the '60's the help wanted section was 20 PAGES long, if you had any skills it took a day to find a decent job. Another bonus bought to you by NAFTA and similar trade "agreements".

    The key is to educate people so they know how to differentiate between wannabees and the people who know what they are doing.

    Bob


    That's a tough one Bob.
    I still don't understand how I'm supposed to hire an HVAC guy. I have no clue how to figure out who's who other than talking to them on here.

    Good luck educating people to be able to differentiate between hacks and good guys. Price is almost moot IMO. Many good guys actually charge less than the hacks.

    Single pipe 392sqft system with an EG-40 rated for 325sqft and it's silent and balanced at all times.

    HatterasguyMark Eatherton
  • Gordy
    Gordy Member Posts: 9,546
    You would think google would be intuitive enough to google heating help, and go from there................