Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
REMS Threader
Alan (California Radiant) Forbes
Member Posts: 4,214
Does anyone know where to get replacement dies for the REMS Amigo threaders? I've looked online and there does not seem to be any outside the UK.
Speaking of the UK, does anyone remember Gary UK?
Speaking of the UK, does anyone remember Gary UK?
8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour
Two btu per sq ft for degree difference for a slab
Two btu per sq ft for degree difference for a slab
0
Comments
-
Yes I remember Gary....good guy.0
-
Teal Corp in Apple Valley MN.
www.remstoolsusa.comBob Boan
You can choose to do what you want, but you cannot choose the consequences.0 -
Somewhat off topic , and not ... I am having problems with my Ridgid 600 . After cursing and rebuilding all of my dies my problems are still there with me ( damaged threads ). I am thinking that something in the drive has become bent and not turning true any more. Can these be fixed or are they just disposable and not worth the cost of repair ?
And if I have to replace does the Amigo use 11 R dies ?hvacfreak
Mechanical Enthusiast
Burnham MST 396 , 60 oz gauge , Tigerloop , Firomatic Check Valve , Mcdonnell Miller 67 lwco , Danfoss RA2k TRV'sEasyio FG20 Controller
0
Categories
- All Categories
- 86.3K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 53 Biomass
- 422 Carbon Monoxide Awareness
- 90 Chimneys & Flues
- 2K Domestic Hot Water
- 5.4K Gas Heating
- 100 Geothermal
- 156 Indoor-Air Quality
- 3.4K Oil Heating
- 63 Pipe Deterioration
- 917 Plumbing
- 6.1K Radiant Heating
- 381 Solar
- 14.9K Strictly Steam
- 3.3K Thermostats and Controls
- 54 Water Quality
- 41 Industry Classes
- 47 Job Opportunities
- 17 Recall Announcements