Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
If our community has helped you, please consider making a contribution to support this website. Thanks!

Burnham Alpine - blower won't start

Options
NoFan
NoFan Member Posts: 1
edited November 2015 in THE MAIN WALL
Hi - I have a Burnham Alpine 105, about 6 years old. This morning I had a hard lockout code 19 "purge rate proving failed", which the documentation says could be a loose connection to the 120V fan wiring, the fan speed harness, or a defective fan.

I've checked all the wiring harnesses at the blower and at the Sage2.1, reset the hard lockout, cycled the power to the boiler, and confirmed that the blower is receiving 120V power. If I spin the blower it will start and run, but will rarely start on the next cycle without manually spinning it again.

My normal service company is not available until next week, nor is anyone else I've called so far. Any suggestions for nursing this along until then?

Comments

  • Ironman
    Ironman Member Posts: 7,858
    Keep spinning it.
    Bob Boan
    You can choose to do what you want, but you cannot choose the consequences.

Categories