Click here to Find a Contractor in your area.
Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
How to design a multiple temperature system with Injection mixing method ?

Roohollah
Member Posts: 117
Dear Instructors and Technicians ,
I am writing to request for the information on How to design a multiple temperature in hydronic heating system in which Injection mixing is considered .I could appreciate you if you would provide me with a hand sketch of the system .
Thank you all for taking the time to share your experience with me and teach me some lessons .
i look forward to hearing from you ,
Yours Sincerely,
Roohollah
I am writing to request for the information on How to design a multiple temperature in hydronic heating system in which Injection mixing is considered .I could appreciate you if you would provide me with a hand sketch of the system .
Thank you all for taking the time to share your experience with me and teach me some lessons .
i look forward to hearing from you ,
Yours Sincerely,
Roohollah
0
Comments
-
This essay does a pretty good job explaining it.
http://tekmarcontrols.com/images/_literature/e0021_06.pdf
They make nice controllers as well.
"If you can't explain it simply, you don't understand it well enough"
Albert Einstein2 -
Dear Zman ,
Thank you for the link .It is very helpful and perfect in design .Your help is greatly appreciated .
Yours Sincerely,
Roohollah0
Categories
- 81.2K THE MAIN WALL
- 2.5K A-C, Heat Pumps & Refrigeration
- 37 Biomass
- 394 Carbon Monoxide Awareness
- 2.7K Controls
- 1.4K Domestic Hot Water
- 3.8K Gas Heating
- 101 Geothermal
- 133 Indoor-Air Quality
- 2.4K Oil Heating
- 32 Pipe Deterioration
- 580 Plumbing
- 4.3K Radiant Heating
- 334 Solar
- 12.3K Strictly Steam
- 38 Water Quality
- 11 Industry Classes
- 51 Job Opportunities
- 8 Recall Announcements