Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

Infloorboard

Options
Alan (California Radiant) Forbes
Alan (California Radiant) Forbes Member Posts: 4,004
in THE MAIN WALL
Has anyone used this product before. It looks like Thermalboard, no?
8.33 lbs./gal. x 60 min./hr. x 20°ΔT = 10,000 BTU's/hour

Two btu per sq ft for degree difference for a slab

Comments

  • Rich_49
    Rich_49 Member Posts: 2,766
    Options
    Looks like more of the same . Homeowners will love it because it is cheap , hacks also that will tolerate conductive material not all the way through the groove . MDF board also , not optimum in my opinion .
    You didn't get what you didn't pay for and it will never be what you thought it would .
    Langans Plumbing & Heating LLC
    732-751-1560
    Serving most of New Jersey, Eastern Pa .
    Consultation, Design & Installation anywhere
    Rich McGrath 732-581-3833
  • RobG
    RobG Member Posts: 1,850
    Options
    They tout it as "lightweight" on their website. They must be using some type of MDF that is new and improved. I have never found MDF to be lightweight.
    SWEIZman

Categories