Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

pilot light going out

StatenIslandhomeowner
StatenIslandhomeowner Member Posts: 4
in Gas Heating
The pilot light keeps on going out on my Slint Fan Galaxy furnace. It new, installed just over a year ago, and I've had to relight the pilot 5 or 6 times in that time. This seems like a lot to me. The installer was reputable. I contacted him when it first happened and he didn't think it was an installation problem. Not sure if I should go back to him, get another company to inspect the whole system, or contact the manufacturer. Any advice would be appreciated.

Comments

  • heatpro02920
    heatpro02920 Member Posts: 991
    call the pro back

    give him a chance to figure out the issue, a call to slant fin tech support to see if this is a common issue wouldn't be a bad idea either...
  • StatenIslandhomeowner
    StatenIslandhomeowner Member Posts: 4
    Thanks.

    Thanks.
  • Tim McElwain
    Tim McElwain Member Posts: 4,651
    I assume this is a Slant Fin

    Galaxy Boiler? Does it have a standing pilot or is it spark ignited? What Model is it a GG or a GXH?
  • Tim McElwain
    Tim McElwain Member Posts: 4,651
    If it is spark ignition

    go to RESOURCES above and click on it then LIBRARY look for TIM'S CLOSET and then go to TROUBLESHOOTING INTERMITTENT IGNITION SYSTEMS FOR FURNACES AND BOILERS.

Categories