Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.

How to vent oil

John Mills_5
John Mills_5 Member Posts: 952
in THE MAIN WALL
New owners of an office in an old house. Took down the chimney venting the furnace. Got b-vent, stuck it out the side wall of the basement and terminated below the eave. This is what we found!

Comments

  • Boiler Talk
    Boiler Talk Member Posts: 143
    Black siding

    Lucky the house didn't burn?  Sure looks like it runs dirty.  Am I wrong or is the soot likely to do that if this were safe? 
  • STEVEusaPA
    STEVEusaPA Member Posts: 6,505
    dumb.......

    Dumb dumb, dumb.  No one gets arrested for fraud.

    There was an error rendering this rich post.

  • Steamhead
    Steamhead Member Posts: 17,509
    Once again

    you can't fix stupid!
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • Steamhead
    Steamhead Member Posts: 17,509
    Once again

    you can't fix stupid!
    All Steamed Up, Inc.
    Towson, MD, USA
    Steam, Vapor & Hot-Water Heating Specialists
    Oil & Gas Burner Service
    Consulting
  • Jamie Hall
    Jamie Hall Member Posts: 25,365
    That's what I was going to say...

    but really, you would think that someone would have noticed this before it got looking like that?  Really?
    Br. Jamie, osb
    Building superintendent/caretaker, 7200 sq. ft. historic house museum with dependencies in New England
  • icesailor
    icesailor Member Posts: 7,265
    Looks like a

    Looks like a few Field SWG's running Beckett AFG's with 70 degree Hago nozzles as a "Universal Nozzle". With serious carbon buildup on the end cone.
  • icesailor
    icesailor Member Posts: 7,265
    B-Vent on Oil:

    B-Vent is an outstanding choice for oil venting.



    What State is this lovely uninspected gem located in?

    I'll bet the owners and installers were really proud of their piping Picasso.
  • RobG
    RobG Member Posts: 1,850
    Venting

    Why line a chimeny when you can do that?  :)



    Rob
  • Jack
    Jack Member Posts: 1,049
    Well,

    We were in a hurry!

    It was easy!

    Why won't it work?

    Even this was more than we wanted to spend!

    It's going to cost how much to fix it? We did it for much less than that!

    You guys are trying to rip us off!

    That paint should have held up better than that. I won't use that brand again!



    You just can't dream this stuff up! Keep us posted on the outcome.

Categories