Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
How can I become qualified/licensed to install hot water boiler systems as a job?

5Speed
Member Posts: 1
in Gas Heating
I live in Pennsylvania, have an associates in science mechanical engineering degree and am 60 years old. I just dry fit a two zone boiler in one of my houses and discovered it was a lot of fun. It has a Beckett Aqua Smart 2600, Tjernlund UC1, and MEC1E controls and a Taco SR502-4 relay. It’s power vented through an exterior wall and the controls are tied into the domestic water heater with a Tjernlund WHKE. I only mention my age because I see some websites refer to apprentices and I believe they have maximum age restrictions that may disqualify me. I've tried goggling my question and only seem to find training for industrial systems.
0
Comments
-
Check with your local
mechanical inspectors office.0
This discussion has been closed.
Categories
- All Categories
- 86.7K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 56 Biomass
- 423 Carbon Monoxide Awareness
- 104 Chimneys & Flues
- 2K Domestic Hot Water
- 5.6K Gas Heating
- 103 Geothermal
- 158 Indoor-Air Quality
- 3.5K Oil Heating
- 68 Pipe Deterioration
- 938 Plumbing
- 6.2K Radiant Heating
- 385 Solar
- 15.3K Strictly Steam
- 3.4K Thermostats and Controls
- 54 Water Quality
- 43 Industry Classes
- 47 Job Opportunities
- 18 Recall Announcements