Welcome! Here are the website rules, as well as some tips for using this forum.
Need to contact us? Visit https://heatinghelp.com/contact-us/.
Click here to Find a Contractor in your area.
Lochinvar WHN with indirect
Options
Dan C.
Member Posts: 248
Can the indirect be piped as a zone on the Knight WHN085 and still be set up as a priority zone through the boiler control? I have always piped it the way they show it in figure 6-3 of the manual off of the boiler loop. I would like to pipe this one as a zone but only if there is a way to change it in the computer and make it a priority zone.
0
Comments
-
Yuppers
Suggest you read page 63 of the installation manual..Section 10 - DHW..
http://www.lochinvar.com/_linefiles/WH-I-O-Rev%20M.pdf"The bitter taste of a poor installation remains much longer than the sweet taste of the lowest price."0
This discussion has been closed.
Categories
- All Categories
- 85.2K THE MAIN WALL
- 3.1K A-C, Heat Pumps & Refrigeration
- 55 Biomass
- 424 Carbon Monoxide Awareness
- 73 Chimneys & Flues
- 1.9K Domestic Hot Water
- 5.2K Gas Heating
- 130 Geothermal
- 160 Indoor-Air Quality
- 3.3K Oil Heating
- 61 Pipe Deterioration
- 884 Plumbing
- 5.9K Radiant Heating
- 376 Solar
- 14.7K Strictly Steam
- 3.2K Thermostats and Controls
- 59 Water Quality
- 49 Industry Classes
- 89 Job Opportunities
- 28 Recall Announcements